Alarm Controller/Host

It will be warning with sound and light when measured value get the set alarm value,at the same time output the control signal.

Alarm controller/Host can accept the signals from detector and transmitter.Measured values are real-time displaying.When measured value reaches the set alarm value, the controller will be warning with sound and light, at the same time output the control signal to mention the operator to take timely measures, or automatically start the pre-connection control devices to ensure safety in production. Our series alarm hosts are used for various industrial alarm control, wall mount, easy to install and operate, with high stability and accuracy.Widely applied in Petroleum, chemical, metallurgy, mining, Electricity, telecommunications, gas, environment Scientific research and national defense.    

Feature:

Precision error of less than 0.2% Fs, good anti-jamming capabilityReceived standard signal :4-20mA1 channel to 16 channels optionalAlarm points and all parameters can be setEach channel is with up to two alarms outputCan be set low and high limit alarm, or two max and two min limit alarm, some models are with delay warning function24V power supply for the probe can be provided by either two-wire or three-wire probeCan correct detected data by probe and  can be adjusted zero remotelyOptional RS485/232 communications

Specification:

Control output	Contact Output  220VAC,2A
voltage	220V AC
Humidity	0-70°C;10-90%R.H(Non-condensing)
Detection accuracy	0.2%F.s(single channel :0.5%F.s)
installation	Wall mount
Weight	1.2 kg(single channel /Dual Channel ),3kg(multiple channel )
Size	200X200X80mm(single channel /Dual Channel ),50X450X100mm(multiple channel )

Please note that this product is designed for non-explosion-proof,do not use in dangerous places.

Alarm Controller/Host